[. . . ] 8 Notice for Users in Australia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Tips and safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Product description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Connecting the monitor and turning the monitor on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The power LED will be lit green, and the screen will display an image. Turn monitor on Turn on device to which monitor is connected Press power button Changing between input terminals Use the INPUT button to switch between signal input terminals. Analog signal input terminal INPUT-1 INPUT DVI-I input terminal (digital) DVI-I input terminal (analog) INPUT-2 (DIGITAL) INPUT-2 (ANALOG) 2. Connect the USB cable. USB port: Downstream (2 ports) Notes:(when using an analog signal) - If using the monitor for the first time or after having changed the system settings during use, perform an automatic screen adjustment (p. - When connecting to a notebook, if the notebook computer's screen is set so that it is displaying at the same time, the MS-DOS screen may not be able to display properly. In this case, change the settings so that only the monitor is displaying. USB port: Upstream (1 port) 3. Replace the cover. 14 Installing set-up information and the ICC profile (Windows) Depending on the computer or OS, it may be necessary to use the computer to operate the installation of monitor set-up information etc. If so, follow the steps below to install the monitor set-up information. (Depending on the type of computer or OS, command names and methods may differ. Please follow the computer's own operation manual while reading this. ) About the ICC profile An ICC (International Color Consortium) profile is a file that describes the color characteristics of the LCD monitor. By using an application that works together with an ICC profile, a high color resolution can be realized. - When installing Windows98, WindowsMe and Windows2000 set-up information (described below), the ICC profile is also installed. If you would like to install the ICC program only, please refer to Installing the ICC profile on page 16. Check [Display a list of all the drivers in a specific location, so you can select the driver you want. ], then click [Next]. When [Models] is displayed, click on [Have disk], confirm that [Copy manufacturer's files from:] is [A:], and click [OK]. Select the monitor details from the list, then click [Next], [Next], and [Finish]. If the "Add new Hardware Wizard" appears, repeat the installation commands beginning from 2 above. In [Options], check [Automatically detect Plug & Play monitors] and click on [Change]. Check [Specify the location of the driver [Advanced]] and click [Next]. Check [Display a list of all the drivers in a specific location, so you can select the driver you want. ] and click [Next]. When [Models] is displayed, click on [Have disk], confirm that [Copy manufacturer's files from:] is [A:], and click [OK]. (If the set-up information has already been installed, so too has the profile, and there is no need to install it. ) This explanation assumes that the floppy disk drive is "A drive". Click on [General] and from [Compatibility] select [Apply the new display setting without restarting], then click on [Color Management]. Click [Add], and select [3 ½ Floppy [A:]] as the file location. [. . . ] If the monitor is receiving timing signals that are not compatible, [OUT OF TIMING] will appear. Follow your computer's instruction manual to set the timing so that it is compatible with the monitor. If the monitor is not receiving any signal (synch signal), [NO SIGNAL] will appear. The analog signal input connector pin All are compliant only with non-interlaced. Frequencies for Power Macintosh and the Sun Ultra series are reference values. [. . . ]